How to set up 2 routers?

“I am yoyohoushuo Technology, focusing on data network answers, welcome to exchange data network questions with me”

As in the title, if two routers want to surf the Internet at the same time, there are two ways to do it One is a wired connection; the other is a wireless bridge How to set up multiple routers. The following is a detailed introduction to the specific operation steps of the two methods:

1. Wired connection. a. Router 1 is normally connected and configured, and the WAN port of Router 2 is connected to the LAN port of Router 1.

b. Configure the LAN port address of router 2. It should be noted that the LAN port address of router 2 is different from the LAN port address of router 1.

c. Configure the wireless password of router 2 and set your own wireless password. It is recommended to use a combination of numbers + letters + symbols to prevent others from cracking it easily.

Second, wireless bridging.

a. First, confirm the wireless name, wireless password, wireless channel, and LAN port address of router 1.

b. Adjust the LAN port address of router 2 to the same network segment as the LAN port address of router 1, and adjust the DHCP address pool to not conflict with the address pool of router 1.

c. Log in to the configuration interface of router 2, enable the wireless bridging function, and enable the WDS function.

d. Scan nearby wireless signals, find the wireless name of router 1, and enter the password to connect.

e. Try to set the wireless channel of router 2 to the same channel as router 1, so that the wireless bridging method is more stable.

Both of these methods can achieve router 2 to access the Internet. It is recommended to use method 1, because the wireless bridging method is to establish a connection and transmit data through wireless. There are too many interference factors and it is not stable, so it is recommended to use the wired method. to fulfill.

You are welcome to pay more attention to me and express your opinions in the comment area below.